Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Jo, Akinori*; Okada, Kenji*; Tamada, Masao; Kume, Tamikazu; Sugo, Takanobu; Tazaki, Masato*
Chemistry for the Protection of the Environment 4; Environmental Science Research, Vol. 59, p.49 - 62, 2005/00
Bifunctional cation exchange fibers were synthesized by co-grafting of chloromethylstylene and styrene. on polyethylene-coated polypropylene fibers. The grafted fibers were fictionalized by Arbuzov reaction, suffonation, and acid hydrolysis. Batchwise evaluation of metal ion selectivity clarified that the bifunctional fiber exhibited cooperative recognition of metal ions by both functional groups. The bifunctional fiber took up Pb(II) more rapidly than the monofunctional phosphoric acid fiber and commercial resin adsorbent. Column-mode experiment revealed that flow rate was independent of break through profiles of Pb(II) up to flow rate of 900 h
in space velocity.
Takahashi, Manabu*; Tanaka, Kazuya*; Tamada, Masao; Aoi, Toru*
Kankyo Kogaku Kenkyu Rombunshu, Vol.41, p.229 - 235, 2004/11
Fibrous metal adsorbent having iminodiacetic acid was synthesized by radiation-induced grafting glycidyl methacrylate on nonwoven fabric and subsequent chemical treatment. The degree of grafting calculated by increasing weight after grafting reached 170 % for reaction time of 2h at 40 
C. The adsorption characteristics of ferric and manganese ions were evaluated by using the resulting adsorbent with 2.1 mmol/g-adsorbent function group of iminodiacetic acid. Each distribution coefficient of ferric and manganese ion deceased with increase of another coexist ion. Both ferric and manganese ions were completely removed by the adsorbent column at the space velocity of 1000h. Adsorption capacities of both ions were reduced to 80% after 5 times reputation of adsorption and desorption.
Jo, Akinori*; Kugara, J.*; Trobradovic, H.*; Yamabe, Kazunori*; Sugo, Takanobu; Tamada, Masao; Kume, Tamikazu
Industrial & Engineering Chemistry Research, 43(7), p.1599 - 1607, 2004/03
Times Cited Count：28 Percentile：67.34(Engineering, Chemical)Fibrous iminodiacetic acid cheating cation exchangers were derived from chloromethylstyrene radiation-grafted polyethylene-coated polypropylene filamentary fiber and its nonwoven cloth. Ligand contents and acid capacities of the resulting cation exchangers were ca. 2 mmol/g and ca. 4 mmol/g for the filamentary fiber and for the non-woven cloth, respectively. The selectivity sequence of nonwoven cloth shape for dialect metal ions is Mg(II) 
Ca(II) 
Co(II) Zn(II) Cd(II) Ni(II) Pb(II) Cu(II). Capacities in mmol/g at pH 5 were Ca(II) 0.91, Mg(II) 0.98, Cd(II) 1.5, Ni(II) 1.5, Pb(II) 1.6, Cu(II) 1.8. Column mode for filamentary fiber shape revealed that breakthrough capacities for Cu(II) (ca. 1 mmol/g) were not dependent on flow rates up to 200 300 h in space velocity.
Basuki, F.*; Seko, Noriaki; Tamada, Masao; Sugo, Takanobu; Kume, Tamikazu
Nihon Ion Kokan Gakkai-Shi, 14(Suppl.), p.209 - 212, 2003/00
Radiation induced graftpolymerization is a sophisticated tool for introducing the aiming functional group into the conventional polymer. Adsorbent having phosphoric acid was directly synthesized by grafting methacrylate monomer having phosphoric acid onto polyethylene nonwoven fabric. Degree of grafting, which was estimated by increment weight after grafting, reached 185 % when the 10 % monomer in the mixture of 10 % methanol and 90 % water was reacted with 200 kGy-irradiated polyethylene nonwoven fabric. The resulting adsorbent revealed that adsorption capacities were 3 mmol/g-adsorbent for Pb and Cd. The removal of these metals could be performed with space velocity of 250 h.
Kugara, J.*; Trobradovic, H.*; Jo, Akinori*; Sugo, Takanobu; Tamada, Masao; Katakai, Akio
Nihon Ion Kokan Gakkai-Shi, 14(Suppl.), p.77 - 80, 2003/00
Chloromethylstyrene-grafted polyethylene-coated polypropylene fiber (0.9 denier) was functionalized by reaction with diethyl iminodiacetate and hydrolysis of the ester introduced. An acid capacity of the resulting chelating fiber (FIDA-f) was 4.3 meq/g. Although a maximum permissible flow rate of feeds was depressed with an increase in the conditioning pH of the FIDA-f column, breakthrough profiles of Pb(II) were independent of the flow rate of feeds up to 800/h in space velocity (SV). The usefulness of FIDA-f was demonstrated by quantitative removal of Pb(II) from 600 bed volumes of a Pb(II)-spiked river water (5 ppm) at a flow rate of SV 400/h.
Jo, Akinori*; Okada, Kenji*; Nakao, Mitsuhiro*; Sugo, Takanobu; Tamada, Masao; Katakai, Akio
Nihon Ion Kokan Gakkai-Shi, 14(Suppl.), p.69 - 72, 2003/00
The titled bifunctional fiber (FVCPS-f) were prepared by treating chloromethylated vinylbiphenyl-grafted polyethylene-coated polypropylene fiber (0.9 denier, length 3.8 cm) with triethyl phosphite, chlorosulfonic acid, and conc. hydrochloric acid, in successive. Phosphorus and sulfur contents of FVCPS-f were 1.8 and 0.7 mmol/g, respectively (acid capacity 4.2 meq/g). Its breakthrough capacity (BC) for Fe(III) gradually decreased with an increase in flow rate of feeds from 20/h to 1000/h in space velocity (SV); for instance, its BC at a SV 1000/h was 0.12 mmol/g, whereas both a commercially available phosphonate resin and a monofunctional phosphonate fiber were not able to give practically meaningful BC at such an extremely high flow rate.
Kimura, Nobuyuki; ; ; ; Kamide, Hideki; Tokuhiro, Akira; Hishida, Koichi
JNC TN9400 2000-057, 60 Pages, 2000/05
JNC-TN9400-2000-057.pdf:2.11MB
ln experimental study for the thermohydraulics of fast reactor, a simple experiment with fine measurement has been desired for understanding of phenomena and for verification of computer code rather than mockup experiments of large scale. For such purposes quality of experimental data must be improved. ln the velocity measurement, instantaneous velocity profile will have great advances for the understanding of phenomena and for the verification of computer code. ln this report two methods of the velocity profile measurement are discussed; one is ultrasound Doppler velocimetry (UDV) and the other is particle image velocimetry (PIV). These methods were applied to water experiments. The UDV was applied to pipe flow, planer jet, and the inter-wrapper flow which is seen in the gap region between subassemblies of fast reactor core. Cross check with laser Doppler velocimetly showed proper measurement of the UDV. Problems including the application to sodium experiments are also discussed. The PIV was also applied to the inter-wrapper flow. For the application to complex flow geometry, noise reduction method was developed to improve the measurement accuracy.
; ; Konishi, Satoshi; ; Kurasawa, T.; ; Naruse, Yuji
JAERI-M 82-158, 51 Pages, 1982/11
no abstracts in English
